SPECIFICATIONS
MODEL
FT-23E
SKU 6629023
WATTAGE 30W
VOLTAGE
120V AC, 60Hz
CLEANING INSTRUCTIONS
1. Always disconnect the cord from the electrical outlet when cleaning your fan.
2. Light accumulated dust may be removed by using a soft cloth to wipe away the dust at the back grille of the fan.
3. Wipe the exterior surfaces of the fan occasionally with a damp cloth (not dripping wet) and dry thoroughly with a soft
dry cloth before operating the fan.
4. Do not use harsh cleaners or materials to clean this unit, doing so will cause damages to it.
CAUTION:
DO NOT ALLOW WATER TO RUN INTO THE INTERIOR OF THE FAN AS THIS COULD CREATE A FIRE
OR ELECTRIC SHOCK HAZARD. THE FAN MOTOR IS FACTORY LUBRICATED FOR LIFE AND WILL REQUIRE NO
FURTHER LUBRICATION. NO OTHER USER MAINTENANCE IS REQUIRED OR RECOMMENDED. IF SERVICE IS
REQUIRED, PLEASE CONTACT CUSTOMER SERVICE.
STORING YOUR FAN
1. Follow cleaning instructions 1-4 above. Make sure to disassemble and clean fan before storing.
2. Retain the original packaging to store your fan.
3. Always store in a dry place.
4. Never store while still plugged in.
5. Never wrap cord tightly around the fan or put any stress on the cord where it enters the fan as it could cause the cord
to fray or break.
TROUBLESHOOTING
If your fan fails to operate, please follow these procedures prior to contacting customer service:
PROBLEM PROBABLE
CAUSE SOLUTION
Fan is not plugged into a 120V
AC, 60Hz polarized
outlet/receptacle.
Ensure unit is in the OFF position. Plug in
unit and attempt to turn on again.
Fan is not turning on.
Breaker/fuse has been tripped.
Please check your electrical box to confirm
the breaker has not been tripped. Ensure
unit is in OFF position. Plug in unit and
attempt to turn on again.
Attempt to plug unit in another receptacle
in the house.
Oscillation function is not
working.
The oscillation knob has not been
activated.
Simply pull press the oscillation knob down
to start the oscillation function. This can be
done while the fan is operating.
Fan is on but air coming out of it
is not strong enough.
There is dust built up at the back
of the fan.
Turn fan OFF and unplug. Using a soft, dry
cloth, wipe the back of the grille to remove
any dust build-up. Plug in unit and turn fan
back ON to resume normal operation.
PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE FAN YOURSELF. DOING SO COULD VOID THE
WARRANTY AND CAUSE DAMAGE OR PERSONAL INJURY.
6629023
FT-23E
4
