Facina_VKPCCTV_Instructions_Rev01
21
still images (video function not available in Time Lapse mode).
The camera will remain in Time Lapse mode until you changed
the program setting, the image resolution and burst number is
the same as PIR mode setting.
•
Slide the switch to the
TEST
position from
OFF
, the status
display will show the camera’s current status.
•
Press
[M]
button once to call out the
program menu, the word
PIR
or
TLS
will be blinking.
•
Press
[DN]
button until you see the
word
TLS
blinking.
•
Press
[M]
to confirm and go into Time Lapse Mode "Start
Time" setting.
•
The display will show
T
+
S- 88:88
(S = Start, 88:88 = time in HH:MM).
•
Press
[M]
to confirm
•
Press
[UP]
or
[DN]
button to
increase or decrease the first digit of hours, then
[M]
to
confirm and go to next digit of hours, repeat by pressing
[UP]
or
[DN]
then
[M]
to complete hours and minutes
value and then save the TLS start time setting.
•
After completing the start time
setting, camera will go into Time
Lapse Mode "End Time" setting.
•
The display will show
T
+
E- 88:88
(E = End, 88:88 = time in HH:MM)