Facina_VKPCCTV_Instructions_Rev01
18
Setting the Image Resolution in PIR mode:
Your camera can be programmed to 3 different image
resolutions: “3 Stars” is 8MP, “2 Stars” is 5MP and “1 Star” is
2MP.
•
Slide the switch to the
TEST
position from
OFF
and the
status display will show the camera’s current status.
•
Press
[M]
button once to call out the program menu and
the word
PIR
will be blinking.
•
Press
[M]
to confirm the camera’s operation is PIR
detection.
•
Press
[UP]
or
[DN
] button until the word
CAM
and
AES
(Resolution) are blinking.
•
Press
[M]
button ONCE to confirm the camera into still
image resolution setting.
•
Press
[UP]
or
[DN]
button to select the desired resolution.
•
Press
[M]
to save your selection, then
burSt
(Burst shoot)
will blink. Press
[M]
to enter the burst shoot setting or
press and hold the
[M]
button 2 seconds to exit.
Setting the Burst Shoot in PIR mode:
Your camera can be programmed to shoot 1-10 pictures per
trigger.
•
Slide the switch to the
TEST
position from
OFF
and the
status display will show the camera’s current status.
•
Press
[M]
button once to call out the program menu and
the word
PIR
will be blinking.