background image

10 

 

System Setup 

 
The attached TX16 chassis will function as an additional Group (3) within the Facilis 
TerraBlock Manager to create and manage additional virtual volumes (see the 
TerraBlock User Guide for creating virtual volumes).  Support for attaching the TX16 
to a TerraBlock server requires:

 

 

1.

 

Version 5.5.x or later release of the TerraBlock server. 

2.

 

The TerraBlock server must be a Windows 7 64Bit server (See the TerraBlock 
Release Notes for server upgrade options, or contact 

Facilis Sales

). 

3.

 

The ATTO H680 SAS HBA installed in the TerraBlock server. 

4.

 

A valid license.  A new license from Facilis is required if running any version 
prior to 7.1.  Consult your dealer or contact Facilis Sales. 

 

Server RAID Adapter Installation 

 

Installation of the ATTO H680 HBA into the TerraBlock Server requires the server to 
be shutdown.  All clients should save their work and then shutdown prior to the 
installation and power down of the TerraBlock Server.  

 

Install the ATTO H680 HBA into the TerraBlock Server (see the ATTO installation 
guide on the USB key supplied). 
 
Boot the server and install the appropriate drivers for the Windows 7 64 Bit 
Operating System (OS) found on the supplied Facilis USB Key (Drivers directory on 
USB Key). 
 
Install the ATTO Configuration tool for Windows found on the supplied USB key onto 
the TerraBlock (Utilities directory on USB Key). 
 

Cabling 

 

Connect the external 
SAS cables (supplied) 
from the TX16 

(both 

ports)

 to the TerraBlock 

server’s ATTO SAS HBA 
(port A and B).  Refer to 
the section “Bringing the 
Expansion Chassis 
Online” before physically 
connecting the cable. 

 

Power cords 

 

 

Connect the power cord (supplied) into the AC port on the rear of the enclosure. 
Before turning on the TX16, make sure that you have all the drive carriers installed 
in the enclosure.  Proceed to the next section before powering on the TX16.  The 
Power button is located on the front of the enclosure (enclosure door open).   

 

 

Summary of Contents for TX16



















Reviews: