●
Mild soap and water
●
Sodium hypochlorite (chlorine bleach) (3% solution in water)
●
Quaternary ammonium compounds (such as Lysol) (10% solution in
water)
●
Do not use abrasive cleaners or strong solvents such as acetone or
acetone-based cleaners.
●
Do not mix disinfecting solutions (such as bleach and ammonia) as
hazardous gases may result.
●
Do not clean electrical contacts or connectors with bleach.
Cleaning instructions:
1.
Before cleaning the product, turn off the device.
2.
Before cleaning, remove all adherent soil (tissue, fluids, etc.) and wipe
thoroughly with a cloth dampened with water before applying the
cleaning solution.
3.
When cleaning, do not immerse. Keep the exterior surface of the
device clean and free of dust and dirt, clean exterior surface of the unit
with a dry, soft cloth .if necessary, clean it with a soft cloth soaked in a
solution of soap and wipe dry with a clean cloth immediately.
Wipe the transducer body with soft cloth to remove any remaining
coupling gel. Clean with soap only
4.
Wring any excess moisture from the cloth before cleaning.
5.
Avoid pouring fluids on the device, and do not allow fluids to penetrate
the exterior surfaces of the device.
6.
To prevent scratching the display, the use of a soft cloth is
recommended.
CAUTION:
To prevent damage to equipment, do not clean any part of the
product or Accessories with phenolic compounds. Do not use
