- 10 -
- 11 -
COMPONENT PARTS
5
USE AND MAINTENANCE HANDBOOK
(This document must always go with the ladder and it must be
shown in case of inspection by authorised bodies)
CERTIFICATE OF CONFORMITY
FACAL declares that CASTIGLIA is manufactured in compliance with
the European Norm EN 131 - 1 / 2 / 3 / 7.
Tests have been carried out by:
Side diagonals
56 cm
61°
Object holder plane
107 cm
Foldway folding handle
Large size anti-slip
steps (150 mm)
Wheels with brake Ø 125 mm
Work top 48x77 cm
Tourning wheels with spring Ø 80 mm
B)
Secure the side diagonals with the screws placed
on the standards.
C)
Thanks to the hand-wheel, block the work top
(detail B). Continue the assembling plugging the
object holder plane and fixing it with the
hand-wheels (detail A)
D)
Before using the platform block the brake of the front wheels
(detail A). Assemble the stabilizers where they are required by
the norm and block it firmly through the hand-wheels.
E)
When you climb and get down off it’s necessary to watch the
platform.
Never turn back on it.
E
B
A
7
Fig. 1
Fig. 2
C
A
A
B
B
A)
Starting from the “closed” position (picture 1), open the platform
putting the work top in a horizontal position (picture 2)
INTRODUCTION: The assembling and disassembling
need at least two people.
SEQUENCE OF OPERATIONS FOR THE ASSEMBLING:
ASSEMBLING AND DISASSEMBLING
SCREW FOR THE
DIAGONALS’ FIXING
A
A
DIAGONAL
DETAIL
(when diagonals
are double)
DIAGONAL
DETAIL
D
B
A
A
STABILIZER
STABILIZER
F)
STABILITY
According to the European Norm EN 131 1/2/3/7
the stabilisers are obligatory as below indicated:
• Small stabilisers (code D660/1 ) up to CA7/250
• Maxi stabilisers (code D662/1) up to CA14/400
LOC-015-Libretto 7lingue CASTIGLIA.indd 10
23/07/19 11:35
