background image

14

TYPE
N.      

/ANNO

KW.  

 

V-   

 

Hz.

CE USO PROFESSIONALE

M A D E   I N  I T A L Y

IPX1

Fig. 2

EN

TECHNICAL DESCRIPTION

AND INTENDED USE

Unless  otherwise  defined  at  the 

moment of order, the machines are 

supplied together with the following:

SUPPLIED ACCESSORIES

•  EU conformity declaration;

•  instructions manual for installation, 

use and maintenance;

•  oiler.

2

.1 - General description

The slicer is mainly constituted by a 

footing which supports a circular blade, 

driven by an electric motor, which has the 

function of slicing food products and by a 

carriage sliding on rails which on its turn 

supports a carriage plate, parallel to the 

blade.

The slice thickness is adjustable thanks 

to a gauge plate placed before the 

blade;  This  plate,  against  which  rests 

the product to be cut, can be moved 

transversely with respect to the blade by 

a value corresponding to the desired slice 

thickness.

 

The product is fed to the machine 

(towards the gauge plate) by weight 

(gravity). 

All components of the machine are made 

of aluminum alloy polished and anodically 

oxidized, stainless steel and plastic 

material for food use.

15

EN

The cutting blade is driven by an electric 

motor and the motion transmission is 

obtained with a longitudinally grooved belt.

Start and stop are performed with a button 

provided with auxiliary circuit preventing 

accidental restarts after an outage.

The machine incorporates (in some 

versions) a sharpener built for ease of use 

and safety.

2

.2  - Environmental conditions of  

the machine use

•  Temperature ..from -5 °C to + 40 °C

•  Relative humidity max 95%

   

2

.3  - Slicer correct use

The slicer is only designed to slice food of 

the type and within the dimensional limits 

indicated in this instruction manuals.

2.3.a - Intended use

 

(sliceable products)

The following products may be sliced:

•  All types of cold cuts (raw and cooked 

ham, bacon).

•  Boneless meat (cooked or raw at a 

temperature of not less than +3°C).

•  Bread and cheese (obviously the 

sliceable type such as Gruyère, 

Fontina, etc.). 

2.3.b - Unexpected or improper use 

(NOT sliceable products)

The following products CANNOT be sliced 

as they are liable to cause serious harm to 

the user and/or slicer itself:

•  Frozen food. 

•  Deep-frozen food.

•  Food with bones (meat and fish).

•  Any other type of product specifically 

excluded product is sliceable but not 

intended to be eaten.

Summary of Contents for S220







































































Reviews: