15 of 44
3.2
–
FITTING THE FLYWHEEL
x
Insert the flywheel (7) so that the
operating handle (6) is positioned
above and to the left of the axis of the
taper pin hole (fig. 8).
Check that flywheel and shaft holes
are correctly aligned.
x
Insert the taper pin (30) in the hole of
the sleeve.
>>>>>
In order to facilitate transport, the flywheel is
delivered unattached to the slicer.
In order to fit, please proceed as follows:
x
Move the carriage as near to the operator
as possible.
x
Remove the taper pin (30) from the
flywheel shaft (31).
Use a hammer to hit the taper pin
(30) on its smaller diameter.
x
Fit the shim (32) to the flywheel shaft (31).
3.2
–
FITTING THE FLYWHEEL
x
Insert the flywheel (7) so that the
operating handle (6) is positioned
above and to the left of the axis of the
taper pin hole (fig. 8).
Check that flywheel and shaft holes
are correctly aligned.
x
Insert the taper pin (30) in the hole of
the sleeve.
>>>>>
In order to facilitate transport, the flywheel is
delivered unattached to the slicer.
In order to fit, please proceed as follows:
x
Move the carriage as near to the operator
as possible.
x
Remove the taper pin (30) from the
flywheel shaft (31).
Use a hammer to hit the taper pin
(30) on its smaller diameter.
x
Fit the shim (32) to the flywheel shaft (31).
Summary of Contents for F250 VO
