Fac F 300 TCV, Use And Maintenance Manual

Page: 34 / 62

32
Fig. 24
EN
SLICER CLEANING
7
.6b - Product tray underplate and
carriage cleaning
• ONLY for “TCV” versions)
• Move the carriage (7) close to the
operator and lift the product tray until
it reaches rest position.
• Clean with a damp cloth and carefully
dry.
7
.7 - Machine reassembling
Proceed in the opposite direction to what indicated in the previous operations.
7
.8 - Store the slicer
• When you finish using it, after carefully
have cleaned all the components (as
described in the previous sections)
be sure to bring the graduated knob
back to “
0
”.
• Is advised to cover the slicer with a
towel to protect it from dust.
If it is not intended to use the slicer
for some days, store it in a sepaired
and dry place.
MAINTENANCE
8
.1 - Generalities
In addition to the above-mentioned cleaning operations, you should also perform routine
maintenance in order to guarantee the slicer’s operating efficiency over time.
7