Fac F 300 TCV, Use And Maintenance Manual

Page: 31 / 62

28
Fig. 18
Fig. 17
EN
SLICER CLEANING
• Fully unscrew (counterclockwise
rotation) the blade guard locking tie
rod (16).
• If the blade guard 8) is blocked, press
on the rod knob (16) to move it.
• Remove the tie rod (16) and remove
the blade guard (8) using only the
special lateral knobs (23).
• Loosen and remove the to screws
with knurled head (24).
• Remove the deflector (21).
24
24
21
23
23
10
8
16
29
Fig. 19
Fig. 20
EN
• Loosen the knob (20a) and remove
the sharpener (20).
SLICER CLEANING
• Take the sharpener (20) from the
knob (20b) and remove it by lifting it.
For the machine’s body and blade cleaning use only a cloth
dampened in water or alcohol and a biodegradable frothy
dishwasher cleanser at pH 7-8, at a temperature at least of
+30°C.
Do not clean the machine ...
... with water or vapor jets or similar methods.
... with corrosive cleansers.
... in the dishwasher.
7
.2 - Disassembling the sliced
holder plate
• Loosen the knurled screw (z) as
shown in the figure and remove the
plate (20) by lifting it.
20
20a
20b
20
z