13.
2011 models only
.Locate the factory brake line mount
on the driver side of the axle. Remove the vent line from
the bolt and remove bolt, save hardware. Locate the
supplied brake line bracket FT30059 in front box kit;
attach the side with the sleeve to the axle using the
factory hardware. Using the supplied 3/8” x 2” bolt, nut,
and washer attach the brake line to the other end.
Reattach vent line. SEE PHOTO BELOW.
14. Recheck all bolts for proper torque. Recheck brake hoses
and lines for proper clearances.
15. Install tires and wheels and torque lug nuts to wheel
manufacturer’s specifications. Turn front tires left to right
and check for appropriate tire clearance.
Note-
Some
oversized tires may require trimming of the front bumper
& valance.
16. Check front-end alignment and set to factory
specifications. Readjust headlights.
FT30275
Add-a-leaf
FT30284
Spacer
FT90080
Center Pin & Nut
