12
Steps to use the Form Wash
•
Use the display and knob to raise the platform and basket
mounts.
•
For convenience, install the build platform with printed parts
directly in the Form Wash to clean the parts before removal.
Align the top lid of the build platform with the arms of the Form
Wash’s Platform mount, and fully insert to touch the back.
•
Turn the knob to navigate the display menu and adjust the wash
time. Push the knob to select or confirm. Wash parts for 15
minutes. Check for all materials the washing schedule above the
Form Wash.
•
The Wash cycle begins when the platform and basket lower.
Ensure the outer lid closes. To adjust the wash cycle time, push
the knob to access the display menu. The pause option will raise
the platform and basket.
•
The platform mount and basket raise automatically at the end of
the wash cycle. After the washing cycle, leave the print to drain.
After 5 minutes remove the build platform and put the Form
Wash into sleep mode.
•
Waite for 30 minutes or use the air pistol to remove any IPA that
has stayed behind
