11
FORM WASH
TO WASH YOUR SLA PRINT
Overview of Form wash
To wash off any uncured resin that is still on your model you can use
the form wash. Rotate the knob to move between items in the menu,
and press the knob to select an option. The following options are
available from the main menu on the Form wash display.
•
“start” option lowers the mount and basket and initiates the
washing process.
•
“Open” option raises the mount and basket
•
“Sleep” option lower the mount and basket. The wash cycle will
not start until “Start” is selected.
•
Time: Press the knob to select and adjust the time, indicated in
minutes.
After beginning a wash cycle, the display shows the remaining time
and additional menu options. Choose “Pause” to stop the agitation and
lift the platform and basket mount, while maintaining the remaining
time in the wash cycle. Choose “end” to cancel the remaining time in
the wash cycle while also stopping the agitation and lifting the
platform and basket mount.
