FabiaTech Corporation
Connecting the DC Power and Power Button
Power is supplied through an external AC/DC power adapter or power DC In. Take
reference to the technical specification section for information about AC/DC
power input voltage. See following figure.
1.
DC-Power Jack: Plug External AC/DC power adapter into DC-jack (2) plug the
cable into hole (1), then pull up the end of the cable (3).
DC +12V~+24V, 80VA minimum
2.
DC Power Connector: Use external 2-pin apartable terminal block.
DC12~24V
Terminal Block
3.
Power Button & Reset Push Button: Pushing the Power button one time will
switch the system on and off. And Reset push button is the switch for system
reset. Push and release the reset button will make hardware reset system and
restart booting the system.
Reset Push Button: Restart
Power button: On/Off
16
