Faber Stilo Isola, Instruction Manual, Page: 9 / 28

EN
9
9
Electrical connection
• In case the hood is to be used together with a remote device, such as external fan or shutter,
then proceed following the instructions here below:
:
1. Loose the screws to remove the cover .
2. Loose the Vx-screws and insert the A/B-cables of the remote device in the metallic ca-
ble inlet grommet.
3. In case the earthing connection is necessary insert also the (C) cable, to be connected to
the green/yellow cable of the terminal board , in the metallic cable inlet grommet.
4. Connect the cables of the remote device (A/B) in the terminal board corresponding to
orange cables;
5. Fasten the Vx-screws and fix the cover again..
• Connect the green yellow earthing cable of the hood to the earthing cable of the building.
• Connect the hood to the mains supply.
Important: Remote device Max.100W
A
B
C
Vx