Faber Presence, Installation Manual And User'S Manual, Page: 9 / 24

8 < < < <
UK IRL
the same room or adjacent rooms
running on high.
•
Check if any other open flue
appliances and flues in the same or
adjacent rooms function correctly
when this appliance is alight.
8 Annual maintenance
8.1 Service and cleaning:
Check and clean if necessary after
checking:
•
The pilot light
•
The combustion chamber
•
Spillage (see chapter 7.5)
•
The glass (see chapter 8.3)
•
For debris (see chapter 8.4)
•
The logs for possible fractures
•
The outlet
8.2
Replace:
•
If necessary the vermiculite.
8.3 Cleaning the glass
Most of the deposits can be removed with a
dry cloth. You can use ceramic hob cleaner to
clean the glass.
Note: prevent fingerprints on the glass. these
will be burned into it once the appliance is
used and cannot be removed anymore!
8.4
Check and cleanup debris
To get access to the debris area, remove the:
1. glass (see chapter 5)
2. log set
3. burner unit.
Therefore:
ƒ Remove the bottom plates in the
front and at the back (see fig.
2.3)
ƒ Unscrew 4 screws (2 at the left
and 2 at the right) and remove
the burner plate including the
burner. (see fig. 2.4)
ƒ
Disconnect the gas.
ƒ Unscrew 13 screws of the burner
unit and 2 screws of the switch
and remove the burner unit. (see
fig. 2.5)
Now the debris area is accessible.
To replace all the parts repeat the process in
reverse order.
8.5 Final check
Carry-out the check-up according to the
instructions in chapter 7 “checking the
installation.
9 Conversion to a different type of
gas (e.g. propane)
This can only be done by installing the proper
burner unit. for this purpose get in touch with
your supplier.
Always mention the type and serial number of
the appliance when ordering.