Faber ODETTE PLUS BK MATT, User Manual

Page: 6 / 144

6
5. REMOTE CONTROL
The remote control is powered by a CR2032
type 3 V battery (not included).
• Do not place the remote control near
heat sources.
• Do not discard the batteries with normal
ycuvg."vjg{"owuv"dg"rwv"kpvq"vjg"urgekÝe"
containers.
Turns the motor On and Off.
-
Turns the lights On/Off.
Enables/Disables the motor at
INTENSIVE speed from any other speed, even if the motor is turned
off. This speed is timed to run for 6 minutes. At the end of this time, the system returns automatically
to the speed that was set before. If it is activated with the motor turned off, it will switch to Off at the
end of the time. It is disabled by pressing the button again or pressing the “Motor Off” button.
Press and hold this button for a few seconds to activate total shutdown of the hood ( motor)
after 30 minutes.
To deactivate the
DELAY , simply press the button again or turn the suction motor off. The DELAY is
kpfkecvgf"qp"vjg"mg{dqctf"d{"Þcujkpi"qh"vjg"oqvqt"NGF"*gxgt{"207"0
Press and hold the button for 2 seconds to activate the 24h function. The hood turns on at speed 1.
In this case the suction motor is turned on for 10 minutes every hour for a total of 24h, after which the
hwpevkqp"ku"fgcevkxcvgf"cwvqocvkecnn{0"Vjg"46j"hwpevkqp"ku"kpfkecvgf"qp"vjg"mg{dqctf"d{"Þcujkpi"qh"vjg"
motor LED (every 2 seconds). To deactivate the 24h function, simply press the button again or turn
the suction motor off. Function not enabled with Intensive or Delay active.
Increases the working speed of the motor.
Decreases the working speed of the motor.
6. LIGHTING
• For replacement contact technical support
(“To purchase contact technical support”).