Faber Nova PRO Installation Instructions Manual Download Page 20

20

January 4, 2016 

FABER CONSUMER WARRANTY & SERVICE  

All Faber products are warranted against any defect in materials or workmanship for the original purchaser 
for a period of 1 year from the date of original purchase (requires proof of purchase).  This warranty covers 
labor and replacement parts.  Faber, at its option, may repair or replace the product or components 
necessary to restore the product to good working condition.  To obtain warranty service, contact the dealer 
from whom you purchased the range hood, or the local Faber distributor. If you cannot identify a local Faber 
distributor, contact us at (508) 358-5353 for the name of a distributor in your area. 

The following is not covered by Faber's warranty: 

1. Service calls to correct the installation of your range hood, to instruct you how to use your range hood, to 
replace or repair house fuses or to correct house wiring or plumbing. 
2. Service calls to repair or replace range hood light bulbs, fuses or filters. Those consumable parts are 
excluded from warranty coverage. 
3. Repairs when your range hood is used for other than normal, single-family household use. 
4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, 
installation not in accordance with electrical or plumbing codes or Faber documentation, or use of products 
not approved by Faber. 
5. Replacement parts or repair labor costs for units operated outside the United States or Canada, including 
any non-UL or C-UL approved Faber range hoods. 
6. Repairs to the hood resulting from unauthorized modifications made to the range hood. 
7. Expenses for travel and transportation for product service in remote locations and pickup and delivery 
charges. Faber range hoods should be serviced in the home. 

THIS WARRANTY DOES NOT ALLOW RECOVERY OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING, WITHOUT 
LIMITATION, DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, PERSONAL INJURY/WRONGFUL 
DEATH OR LOST PROFITS FABER  WARRANTY IS LIMITED TO THE ABOVE CONDITIONS AND TO THE WARRANTY PERIOD 
SPECIFIED HEREIN AND IS EXCLUSIVE. EXCEPT AS EXPRESSLY SPECIFIED IN THIS AGREEMENT, FABER DISCLAIMS ALL 
EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS, AND WARRANTIES INCLUDING, WITHOUT LIMITATION, ANY 
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE

.

This warranty gives you specific legal rights that may vary from state to state. 

Model#: ______________________________                  Serial #: _____________________________ 

Summary of Contents for Nova PRO





















Reviews: