Faber MatriX 1050/650-I, Installation Instructions Manual

Page: 27 / 41

Installation Instructions
27
Light the pilot flame with
the remote, beep every
second?
NO
YES
Clearly audible click
from the solenoid in
the gas valve?
NO
NO
NO
YES
Every second a spark?
NO
16 Troubleshooting guide
YES
Pilot lights?
NO
- Learn a new code for remote.
- Battery remote.
- Battery receiver.
- Faulty adapter.
- Faulty receiver.
- See inst. manual.
- 1x 9V Alkaline.
- 4x 1.5V AA Alkaline.
- Replace 6V adapter.
- Replace the receiver.
3 short
beep's
Low battery
receiver.
4x 1.5V AA Alkaline
No beep
Faulty solenoid gas valve.
Replace the gas
valve.
1 long
beep
- Thermocouple circuit is
interrupted, check:
- 8 wire cable from receiver
to the gas valve.
- If the wire on the bottom
of the gas valve is not
broken or stuck and makes
a ground contact.
- Motor gas valve doesn't
work.
- Micro switch on gas valve
doesn't work.
Replace faulty
parts.
Check:
- HT lead and sparking plug.
- Check the distance between
sparking plug and pilot top?
- Insulate the HT lead.
- Cut of a small piece from the
sparking plug.
- Tie-wraps removed?
- Cable is free from any metal parts?
- Check power supply of the receiver.
- Air in the gas tube.
- Clean the pilot burner, primary air opening, flexible gas tube
and pilot injector.
- Check inlet pressure?
- Faulty solenoid?
(Clearly audible click from the solenoid in the gas valve)