Faber GLORY PRO X/V A 60 LOGIC, Instruction Manual

Page: 11 / 68

EN
1
1
11
USE
E F G H A B C D
Control panel
Button Function Display
A Turns the suction motor on and off at the
last speed used. Displays the set speed.
B Decrease the working speed. The number of lighted segments decreases.
C Increase the working speed. The number of lighted segments increases.
D Activate intensive speed from any other
speed, including motor off. This speed is
set to operate for 10 minutes, after which
the system returns to the speed that was set
before. Suitable to deal with maximum
levels of cooking fumes. The indicator I flashes and all the segments on
the Display are lit.
It is disabled by pressing the Button.
E Starts the Motor at a speed that allows
suction of 100 m3/h for 10 minutes every
hour, after which the Motor will stop. Displays 24 and the segments on the Display
all light up and then turn off one at a time in
cycle.
It is disabled by pressing the Button.
F Activate automatic switch-off with a 30’
delay. Suitable to complete elimination of
residual odours. Can be activated from any
position, and is disabled by pressing the
button or turning the motor off. Displays a flashing Clock symbol.
It is disabled by pressing the Button.
G Perform a Reset of the Filter saturation
alarm when the Button is pressed for ap-
proximately 2 seconds. After 100 hours in operation the Drop symbol
is displayed to indicate saturation of the Metal
Grease Filters.
After 200 hours in operation the letter C is
displayed to indicate saturation of the Acti-
vated Charcoal filters.
H Turns the lighting system (Spotlights) on
and off. Turns the Neon lights on and off
when pressed and held for 2 seconds.
Keyboard Lock: it is possible to lock the keyboard, for example when cleaning the Glass,
when the Hood has Motor and Lights turned off.
Press D (Intensive) for approximately 5 Seconds to enable or disable the Keyboard Lock,
which is always confirmed by a Beep and an animation on the display motor bar.