Faber CLAS30SS600-B, Installation Instructions Manual

Page: 13 / 32

13
• Remove grease filters.
• Screw the Frame into place
12f
, re-
LED LIGHTING UNIT
• LED lights must be replaced by Faber factory authorized
service.
"KD@MHMFLDS@KFQD@RDkKSDQR
7KHPHWDOJUHDVH¿OWHUVFDQEHFOHDQHGLQKRWGHWHUJHQW
solution or washed in the dishwasher. They should be
cleaned every 2 months, or more frequently if use is
particularly heavy.
•
5HPRYHWKH¿OWHUSXVKLQJWKHOHYHUWRZDUGVWKH
back of the unit and at the same time pulling
downward.
•
:DVKWKH¿OWHUZLWKRXWEHQGLQJLWOHDYHLWWRGU\
thoroughly before replacing (if the surface of
WKH¿OWHUFKDQJHVFRORURYHUWLPHWKLVZLOOKDYH
DEVROXWHO\QRHIIHFWRQLWVHI¿FLHQF\
• Replace, taking care to ensure that the
handle faces forward.
•
&OHDQLQJLQGLVKZDVKHUPD\GXOOWKH¿QLVK
RIWKHPHWDOJUHDVH¿OWHU
Replacing Activated Charcoal Filter
The Activated Charcoal Filters are not washable
and cannot be regenerated, and should be
replaced approximately every 4 months of
operation, or more frequently with heavy usage.
•
5HPRYHWKHFKDUFRDO¿OWHUE\URWDWLQJLWFORFNZLVH
backwards) until it unlocks from the motor housing
and pull off sideways.
•
7RUHLQVHUWHDFKFKDUFRDO¿OWHUSODFHXSDJDLQVW
the side of the blower and push it inward. Then
WXUQWKHFKDUFRDO¿OWHUFORFNZLVHIRUZDUGXQWLOLW
¿WVLQWRSODFH
5
W