I n s t a l l a t i o n I n s t r u c t i o n s
7
1 Dear User
Congratulations on your purchase of a Faber fire! A quality product
from which you will experience warmth and ambience for many
years. We recommend that you read these directions for use
carefully before using the fire. If any problem arises despite our
strict quality control, you can always contact your dealer or Glen
Dimplex Benelux BV.
For any warranty claims, it is essential you first register your
fireplace. To this end, we have created a dedicated website.
During this registration, you’ll find all information regarding
our warranty.
>
PLEASE NOTE: The data of your fireplace is available in
the user manual.
You can register your fireplace at: www.gdbservice.com
Glen Dimplex Benelux BV
Address: Saternus 8
NL-8448
CC
Heerenveen
Phone:
+31 (0)513 656 500
Fax:
+31 (0)513 656 501
E-mail:
Information: www.faber.nl
1.1
Introduction
Only have the appliance installed by a qualified installer according
to the gas safety regulations.
Read this installation manual properly.
1.2
Check
Check the fire for transport damage and immediately inform your
supplier of any damages.
Check whether all of the parts below are included:
1. Decorative Material
2. Cover Ionisation pin.(fig.4.1A)
3. Suction Cups
4. Warranty Card
5. User Manual
6. Installation Instructions
7. Instruction Chart Decorative Material
8. Remote control
9. Decorative Frame
10. 4 ventilation grilles
11. Aluminium flexible duct
12. 4 hose clips
The flue gas fan and flue pipe components must be purchased
separately
4.2
