MAP2 / MAP2L
CLG-SL
FABER-COM srl - Via Romana 36/1 - 42028 Poviglio (RE) - Italy Tel. +39-0522-960428 Fax. +39-0522-969644 - www.fabercom.it
\Prodotti\Limitatore CLG\PCLG-LxE[CLG-SL- Barra LED]\Documenti\SM#Limitatore CLG-SL_v102 - 19/04/2017
A
B
C
8 7 6 5 4 3 2 1
Page 1 / 6
Overall dimensions: 138 x 110 (147 with connector) x 38 mm
Drilling interaxis: 119 x 99 mm (n° 4 screw M5)
A1
- Power supply
A2
- +V transducer supply
A3
- not used
A4
- +V switch supply
A5
- +V switch supply
A6
- not used
A7
- DV input
A8
- Emergency input
B1
- RX serial comm.
B2
- +V PRG2 supply
B3
- ground for 90% signal
B4
- +ELV1 signal
B5
- ELV1 ground
B6
- input TRANSD. 1 (P)
B7
- input DECREMENT
B8
- Emergency output
C1
- TX serial comm.
C2
- PRG2 ground signal
C3
- ground for 100% signal
C4
- not used
C5
- not used
C6
- input RESET
C7
- not used
C8
- GND
Pinout FCI connector (24 ways)
04/01/2017 - v100: Prima stesura [VA] a cui il 24/02/2017 seguono piccole correzioni. Il documento fino ad allora è stato ad uso interno
27/03/2017 - v101: rivista un po' la grafica [VA]
CLG-SL Load limiter is an electronic device able to control the load of the crane (or another machine) through a
pressure transducer, and limits the operations that would cause an overloading and/or an overturning of the
machine, acting on the bypass valve.
Load limiter for crane
