Intended use
These operating instructions contain important technical
and safety information. Please read carefully before instal-
lation and before any work on or with the regulator.
The control cabinet for milk cooling tanks is used to control the stirrer
motors and cooling compressors of milk-cooling systems. Any other use
of the device is permissible only with the manufacturer's written consent.
The control cabinet is ready for use once the parameters have been set.
It should not be used before this has been done, as this might result in
damage to the plant or the milk.
The device is fitted with a resistance temperature sensor. The output
ports are designed as potential-free relay ports.
The device must not be installed in potentially explosive atmospheres.
The control cabinet for milk cooling tanks fulfils the EC requirements for
electromagnetic compatibility (EMC) and the Low Voltage
Directive (LVD).
The safety components meet the VDE regulations.
Safety
These operating instructions contain important technical
and safety information. Please read them carefully before
installation and before working on or with the regulator.
The control cabinet must be installed by an authorised
specialist, observing local safety regulations.
Access to the environment when connected must be
restricted to specialised personnel.
The control cabinet contains live components and must
not be opened up.
It must not be used if the housing or connection terminals
are damaged.
No fluids must penetrate the housing.
The control cabinet may not be exported to the USA wit-
hout the manufacturer's express permission.
Page 4
