18
Allow manually stopping encoding without prompting
When the encoding process is stopped by clicking on “STOP” before the
duration is reached a warning will be displayed if this setting is not checked.
Control VTR with Sony 9-pin protocol on COMx
FAB Media Encoder can be connected to a VTR over a serial port. In such case
the VTR can be controlled with Play, Pause, … buttons displayed by FAB
Media Encoder. Also the VTR will be put into Play mode automatically when
the encoding process is started in FAB Media Encoder.
Allow remote control by VDCP protocol on COMx
FAB Media Encoder can be connected to an automation system (i.e Louth
Media Client). In such case the automation system will control the encoding
process remotely. Select the COM port that will be used for the VDCP protocol
and make sure that you have a RS232/RS422 converter because the VDCP
protocol is using RS422.
