Installation Instructions
Tire Carrier
Product Number: Y1351T/Y1451T
Application: ’05-Current Toyota Tacoma
Page 13 of 16
Y1351T-Rev.B
Copyright 2012 Fab Fours, Inc.
L. Use the supplied 7/16”-14 x1.25” long bolts, washers
(each side), lock washers, and nuts to secure the tire
carrier horizontal mount to the tire carrier with 4 bolts
passing through each side and the nuts located on the
inside of the channel of the tire carrier.
M. Install one 7/16-14x1” long bolt, 2 washers, lock
washer, and nut through the hole passing through the top
section of both locating the nut again on the inside of the
channel.
N. Retighten all bolts in the assembly!
O. With the tire carrier latched shut, place the spare tire
onto the tire carrier and use M12x 1.5 lug nuts to secure it
to the OEM specifications in your owner’s manual.
P. If you own or plan to purchase a CB Radio, your Fab
Fours Tire Carrier comes standard with a CB Antenna
mount shown below.
Figure 15 – CB Radio antenna mount