Installation Instructions
Ford F150 Premium Front Bumper
Product Number: H4550, H4551, H4552
Application: 2018+ Ford F150
H455X_REV_A
III. Pre-Installation
NOTE: The following installation steps apply to the installation of the front bumper.
PLEASE READ THE ENTIRE MANUAL BEFORE ATEMPTING
INSTALLATION. Ignoring these steps will increase your probability of scratching
the vehicle during product installation.
A.
Remove the bumper from the shipping carton. Lay all items out on a
blanket to prevent damage to the powder coating.
B.
Tap into OEM electrical harness and wiring using supplied tap
connectors using the diagram on the following page.
C.
Connect supplied wiring harness to tap connectors. DO NOT
CONNNECT LIGHTS UNTIL BUMPER IS INSTALLED.
FAB FOURS TURN INDICATOR WIRING
WHITE WIRE = GROUND
BROWN WIRE = RUNNING
RED WIRE = TURN
FAB FOURS FOG LIGHT WIRING
WHITE WIRE = GROUND
BLACK WIRE = POWER
*Note: For customers that are going from LED to our LED lights you should not need to
use the provided resistors*
*For customers that are going from Halogen to our LED lights then you may need to use
the provided resistors on our turn indicators; please wire the resistors between your
power and ground wire*
*Use a multi-meter or test light to determine the correct location for each wire
www.4x4ok.com
