Installation Instructions
Ford F150 Premium Front Bumper
Product Number: H4550, H4551, H4552
Application: 2018+ Ford F150
H455X_REV_A
Not Fully Tighten, Hand Tighten Only
!
D.
Align the bumper side to side and top to bottom to ensure a perfect fit
to the truck. Allow 0.375” of clearance to all painted surfaces if
possible. This is to allow for frame flex!
E.
Fully tighten all fasteners between bumper and brackets as well as
brackets and frame.
F.
The fog light wiring may be installed at this time. To do so, connect
wiring to fog light and tap into OEM fog light wiring using supplied
tap connectors. Secure excess wiring to bumper.
G.
Install turn indicators into the plastic light insert using three self-
tapping screws as shown below:
Figure 6
H.
Install the light inserts with turn indicators into the cutout in the
bumper. Use the ¾” length ¼” stainless steel button head, ¼” washers
and hex nuts to fasten the insert through the holes shown below:
www.4x4ok.com
