Installation Instructions
Yukon XL 1500 Winch Bumper
Product Number: H2340-H2342
Application: ’07-’12 GMC Yukon XL 1500
Copyright 2012 Fab Fours, Inc.
Page 13 of 21
H234X_REV_A-Rev.A
V.
Lights and Wiring Installation
1.
With the headlights removed, tap into the turn indicator wiring with the
supplied tap connectors.
2.
The turn indicator wiring harness may be installed at this time. To do so,
remove the wiring harness and bulb socket from the lens housing. See below
for wire color guide.
WIRE COLORS:
WIRE
OEM COLOR
FAB FOURS COLOR
Running
Brown
White
Turn
White/Blue (Pass)
Red
Ground
Power
Black
Purple
Green
Red
Ground
Black
Green
3.
Tuck the Fab Fours provided wiring and bulb out of the way until the
installation of the Fab Fours bumper is complete.
4.
Replace headlights in reverse order of removal. Be sure to route newly
installed Fab Fours wiring away from sharp edges down to the bumper area.
5.
Tap into OEM fog light harnesses on each side of the vehicle using two
supplied tap connectors.
6.
Connect the supplied fog lamp wiring harnesses to tap connectors following
wire color guide above.
7.
Tuck OEM fog light harness and Fab Fours supplied wiring out of the way
until completion of the bumper installation.
TURN SIGNALS
FOG LIGHT
