TROUBLESHOOTING
8
7
1. After installing the device, the multimedia won’t turn on.
• Review the installation process and check if all the connections have been
made according to the charts on pages 3 and 4;
• Check if the connectors are plugged in tight;
• Check if the terminals inside the connectors are aligned;
• Check if there isn’t any wire loose from the whip.
2. When I put the car on reverse, I see two parking lines.
• Turn off the parking lines for the rear camera. In order to do that, check the
camera’s manual.
3. On the rear camera or on the front camera, I see an “incompatible video”
message.
• Check if the installed camera is compatible. FT-RC-AUD3 only works with a
NTSC video system camera, any other format is not compatible;
4. When I switch my car out of gear, I see a “front camera” message, and
the screen goes black with a “No Signal” warning.
• Check the DIP Switch 1. If you are not installing a front camera, keep that
switch DOWN;
• If you have installed a front camera, check its installation (power plug, video
connections, etc.)
