1/4
XMS
1/4
The sensor can be installed
on the surface by using the
accessory XMS-VB.
When clipsing the front
face, make sure the zone
for the LED is at the bottom.
Use the screwdriver to
remove the front face.
Avoid moving objects in
front of the sensor
Do not place the sensor
behind metallic plates.
Do not force when turning
the adjustment screw.
Do not place the sensor
in the opening range of
the door.
The sensor can be placed
behind tiles, wood, plaster,
plastic and glass.
Detection range adjustment
Front face
after power on
during activation
of output relay
LED
Antenna
Fixing frame
Output mode:
Toggle or Pulse
Terminal block
INSTALLATION TIPS
DESCRIPTION
MICROWAVE CONTACTLESS SWITCH
USER’S GUIDE
