TM2
ERX
31
A4518_6G41_Rev.A
SETTING THE CLOSING POSITION
SETTING THE OPENING POSITION
EXAMPLE 2:
Setting first the closing position
If the rolling shutter is completely closed, you have first to drive it up by around 20
cm.
Hold the button A or C pressed and drive the rolling shutter to the closing position.
With lockdown hangers
: press buttons A or C until the motor stops automatically.
Without lock down hangers
: use the button A or C to drive the rolling shutter to
the necessary closing position.
To set the closing position, press buttons B (stop) and C (down) simultaneously
for about 2 seconds, until the motor performs automatically a short “up” move-
ment.
This move is the visual confirmation of the setting operation.
Tn: Already programmed remote control
Pressing now button A, drive completely up the rolling shutter to the opening
position.
With physical stops
: press button A until the motor stops automatically.
Without physical stops
: use the button A or C to drive the rolling shutter to the
necessary opening position.
To set the opening position, press buttons A (up) and B (stop) simultaneously
for about 2 seconds, until the motor automatically performs a short “down”
movement.
This move is the visual confirmation of the setting operation.
Tn: Already programmed remote control
Tn (2 sec)
confi rm
?
A
C
+
B
C
Tn
confi rm
Tn (2 sec)
Tn
+
A
B
A
EN