background image

Le descrizioni e le illustrazioni del presente manuale non sono impegnative. La FAAC si riserva il diritto, lasciando inal-

terate le caratteristiche essenziali dell’apparecchiatura, di apportare in qualunque momento e senza impegnarsi 

ad aggiornare la presente pubblicazione, le modifiche che essa ritiene convenienti per miglioramenti tecnici o per 

qualsiasi altra esigenza di carattere costruttivo o commerciale.

The descriptions and illustrations contained in the present manual are not binding. FAAC reserves the right, whilst 

leaving the main features of the equipments unaltered, to undertake any modifications it holds necessary for either 

technical or commercial reasons, at any time and without revising the present publication.

Les descriptions et les illustrations du présent manuel sont fournies à titre indicatif. FAAC se réserve le droit d’apporter à 

tout moment les modifications qu’elle jugera utiles sur ce produit tout en conservant les caractéristiques essentielles, 

sans devoir pour autant mettre à jour cette publication.

Die Beschreibungen und Abbildungen in vorliegendem Handbuch sind unverbindlich. FAAC behält sich das Recht 

vor, ohne die wesentlichen Eigenschaften dieses Gerätes zu verändern und ohne Verbindlichkeiten in Bezug auf die 

Neufassung der vorliegenden Anleitungen, technisch bzw. konstruktiv/kommerziell bedingte Verbesserungen vorzu-

nehmen.

Las descripciones y las ilustraciones de este manual no comportan compromiso alguno. FAAC se reserva el derecho, 

dejando inmutadas las características esenciales de los aparatos, de aportar, en cualquier momento y sin compro-

meterse a poner al día la presente publicación, todas las modificaciones que considere oportunas para el perfec-

cionamiento técnico o para cualquier otro tipo de exigencia de carácter constructivo o comercial.

De beschrijvingen in deze handleiding zijn niet bindend. FAAC behoudt zich het recht voor op elk willekeurig moment de 

veranderingen aan te brengen die het bedrijf nuttig acht met het oog op technische verbeteringen of alle mogelijke 

andere productie- of commerciële eisen, waarbij de fundamentele eigenschappen van de apparaat gehandhaafd 

blijven, zonder zich daardoor te verplichten deze publicatie bij te werken.

FAAC S.p.A.

Via Calari, 10

40069 Zola Predosa (BO) - ITALIA

Tel.  0039.051.61724 - Fax.  0039.051.758518

www.faac.it

www.faacgroup.com

732699 - Rev. E

Summary of Contents for S450H












Reviews: