….
0000
The first two digits are the enabling of the outputs for reading on
A, whereas the last two digits are the enabling of the outputs for
reading on B.
25 x 1001
E
= User 25 enables output 1 for reading on A
and output 2 for reading on B.
15 x 0001
E
= User 15 enables output 2 for reading on B.
MENU 4 IMPORT DATA
This option makes it possible to import to the control unit, all the data which were previously stored on an external memory board (MEM-EXP)
•
Enter the function with:
4 x Master Code
E
or with:
4 then the Master Card reading
•
Type in the
number
which stands for the type of Import to be executed followed by
E
. These are the possibilities:
1
= Total import
2
= import Codes + Settings
3
= import codes only
4
= import Settings only
MENU 5 EXPORT DATA
This option makes it possible to export to an external memory board (MEM-EXP), all the data which were previously stored on the control unit.
•
Enter the function with:
5 x Master Code
E
or with:
5 then the Master Card reading
•
Type in the
number
which stands for the type of Export to be executed followed by
E
. These are the possibilities:
1
= Total export
2
= export Codes + Settings
3
= export Codes only
4
= export Settings only
MENU 6 CONFIGURATION INPUT/OUTPUT
With this menu you can set: the function logic of the inputs and the activation times of the control unit outputs.
•
Enter the function with:
6 x Master Code
E
or with:
6 then the Master Card reading
•
Type in the
command
to vary the required parameter. The command consists of two values separated by key x. The first value is the function to
be set, whereas the second value can express: a time or a logic.
Description
Command
Default
Example of typing in
Relay 1 time (in tenths)
1xT (T = time 0 - 65535)
30
1x387
E
for time of 38 sec. and 7 tenths.
1x5
E
for a time of 5 tenths
Relay 2 time (in tenths)
2xT (T = time 0 - 65535)
30
2x60
E
for a time of 60 tenths
Alarm exit Time (in tenths)
3xT (T = time 0 - 65535)
300
3x150
E
for a time of 150 tenths
"Door status" disabling time (sec)
4xT (T = time 0 - 65535)
16
4x25
E
for a time of 25 seconds
Electric strike management
5x1 = Yes (5x0 =No)
5x1
E
activates electric encounter management
Logic INP1
6x1 = NC (6x0 =NO)
NO
6x1
E
logic NC. “6x0” logic NO
Logic IngP2
7x1 = NC (7x0 =NO)
NO
7x1
E
logic NC. “7x0” logic NO
Tamper Input Logic
8x1 = NC (8x0 =NO)
NC
8x1
E
logic NC. “8x0” logic NO
Logic INP-AUX
9x1 = NC (9x0 =NO)
NO
9x1
E
logic NC. “9x0” logic NO
MENU 7 CONFIGURATION READER B
This configuration makes it possible to program the functions of reader B:
•
Enter the function with:
7 x Master Code
E
or with:
7 then the Master Card reading
•
Type in the
command
to vary the required parameter. The command consists of two values separated by key x. The first value is the function to
be set, whereas the second value can express: a time or an enabling operation.
MENU 8 ACTIVATION INTERNAL/EXTERNAL CARD READER
The above mentioned menu enables you to activate/disable card reader A or B.
•
Enter the function with:
8 x Master Code
E
or with:
8 then the Master Card reading
•
Type in the
command
to vary the required parameter. The command consists of two values separated by key x. The first value is the function to
be set, whereas the second value is the activation/disabling to be executed.
Command
Default
Description
Example of typing in
1x1 = Yes (1x0 = No)
Yes
Activates RF Module for Passive cards
1x1
E
to activate. 1x0
E
to disable.
2x1 = Yes (2x0 = No)
No
Activates card reader B
2x1
E
to activate 2x0
E
to disable
SPECIAL COMMANDS
65000 × “MASTERCODE
E
” = All absent
65000 then reading “MASTERCODE
E
” = All absent
65001 × “MASTERCODE
E
” = All present
65001 then reading “MASTERCODE
E
” = All present
65300 × “MASTERCODE
E
” = Cancel "User Codes" only”
65300 then reading “MASTERCODE
E
” = Cancel "User Codes" only”
65301 × “MASTERCODE
E
” = Reset settings only (+ Def.)
65301 then reading “MASTERCODE
E
” = Reset settings only (+ Def.)
65534 × “MASTERCODE
E
” = Cancel “Master-Code” only
65534 then reading “MASTERCODE
E
” = Cancel “Master-Code” only
65535 then reading “MASTERCODE
E
” = Reset all (and put on Default)
65535 × “MASTERCODE
E
” = Reset all (and put on Default)
Rapid Guide Resist-SA TAG10 SA ver.1-1 rev. A
3
Description
Command
Default
Example of typing in
Reader B ignore time in seconds
1xT (T = time 0 ÷ 255)
0
1x10
E
for a time of 10 sec.
Double gateway
2x1 = Yes (2x0 = No)
No
2x1
E
to enable “Double gateway”
Management of door associated with B
3x1 = Yes (3x0 = No)
No
3x1
E
for “Door management” associated with B
Antipassback
4x1 = Yes (4x0 = No)
No
4x1
E
to activate Antipassback (APB)
No Antipassback at Exit
5x1 = Yes (5x0 = No)
Yes
5x0
E
on Exit reader, use APB
Reader B Entry
6x1 = Yes (6x0 = No)
Yes
6x1
E
reader B for Entry and A for Exit
Reset Card 1
7xN (N = Card No.)
0
7x499
E
Reset Card 1 is 499
Reset Card 2
8xN (N = Card No.)
0
8x500
E
Reset Card 2 is 500
LRC reader B
9x1 = Yes (9x0 = No)
Yes
9x0
E
disables LRC on reader B
Wiegand/Mag-stripe
10x1 = Wie (10x0 = M-S)
M-S
10x1
E
reader B is Wiegand
