ND1
4
732558 - Rev. D
First of all, check that the shutter works properly. If need-
ed, lubricate the hinges and level the shutter. (Fig. 3.1)
3
PRELIMINARY OPERATIONS AND TECHNICAL SPECIFICATIONS
3.2
Checking shutter operation
The following table describes the application limits for the various kits.
3.1 Application
limits
Fig. 3.1
MODEL
COMPARTMENT MAXIMUM WIDTH (mm)
(* cutting the casing and shaft)
COMPARTMENT MAXIMUM WIDTH
(mm)
N1D KIT
1 LEAF
672 (* 600)
1100
2 LEAVES
850 (* 780)
1400
N1D AUTO KIT
1 LEAF
760 (* 660)
1400
2 LEAVES
960 (* 860)
1600
N1D SENSO KIT
1 LEAF
760 (* 660)
1400
2 LEAVES
960 (* 860)
1600
Automations of the N1D line are designed to automate shutters in the 16 confi gurations described in chapter 4.
In the case of a double leaf application, the opening angles of the two leaves must be identical.
Diff erent models require diff erent modes of operation:
1) N1D KIT : controlled by distinct opening / closing buttons, with dead man logic. The N1D model kit does not require automatic limit
switches.
2) N1D AUTO KIT : controlled by distinct opening / closing buttons. The N1D model AUTO kit requires automatic limit switches that recog-
nise the mechanical opening and closing stops and interrupt the stroke.
3) N1D SENSO KIT : remote controlled and by a step logic button (optional). The opening and closing limit switches are set during the
learning stage. The automation recognises the presence of obstacles during the stroke.
N1D KIT
N1D AUTO KIT
N1D SENSO KIT
POWER SUPPLY VOLTAGE
230V 50-60Hz
POWER
130W
180 W
180 W
OPENING/CLOSING TIME
About 16 seconds
POWER SUPPLY CABLE OUTLET
Right or left
RAL CASING
White RAL 9010 or Brown RAL 8017
CONTROL
Dead man switch
Switch
Opens/Closes
FAAC 433 MHz radio transmitter
or step button