9
FAAC S.p.A.
Via Benini, 1
40069 Zola Predosa (BO) - ITALIA
Tel.: 051/61724 - Fax: 051/758518
www.faac.it
7325291 Rev. A
CE DECLARATION OF CONFORMITY
Manufacturer:
FAAC S.p.A.
Address:
Via Benini, 1 - 40069 Zola Predosa BOLOGNA - ITALY
Declares that:
The opto-electronic active protection device mod. MSE110W,
•conforms to the essential safety requirements of the following ECC directives:
EN 12978 - Category 2
73/23/EEC and subsequent amendment 93/68/EEC.
89/336/EEC and subsequent amendment 92/31/EEC and 93/68/EEC
Additional information:
This product underwent a test in a typical, uniform configuration.
(all products manufactured by FAAC S.p.A):
Bologna, 01 January 2006.
The Managing Director
A. Bassi
WARNINGS
•
Attention! For the safety of people, it is important that all the instructions be carefully observed.
•
Incorrect installation or incorrect use of the product could cause serious harm to people.
•
Carefully read the instructions before beginning to install the product and keep them for future reference.
•
The symbol
indicates notes that are important for the safety of persons and for the good condition of the automated system
•
The symbol
draws your attention to the notes on the characteristics or operation of the product.
Summary of Contents for MSE 110 W
Page 1: ...MSE 110 W MSE 110 W...
Page 9: ......
