12
Programming
Now that you have either entered a new client, or selected an existing client from the client list,
you are now ready to begin programming.
Step 1A: Check Reception
Go to MORE>INFO to reveal the screen shown.
Press the reception check button. On Android the app
will automatically send a SMS string (*20#) to the
intercom.
On iphone, users will be taken to their SMS
screen to confirm before sending the string.
The intercom should reply with a signal level between 1
& 31.
1-12
Poor
13-20
Medium
21-31
Good
For good performance, signal level should be at least
13 or better.
TIP:
If signal is lower than recommended, then take
IMMEDIATE action. Change network if possible, or use an
optional high gain antenna. Check power cable is within
recommended specification. (Poor power cable can
lower reception).
SMS message sent to the intercom
SMS reply to your phone
Step1C: Reboot the Intercom
The intercom will need to be rebooted in order to log on to the network with the new APN which you
have stored. If you send another reception check (*20#), you may find that if it was on 3G signal
strength before, that it is now on 4G signal.
Step1B: Set APN (for VOLTE / 4G voice calling)
This feature may need to be set in order to make 4G voice calls with At&T a
reseller of At&T. Check the APN of your provider, enter it in the blue section
below & send as SMS to the intercom. TIP: For At&T cards from At&T store
use
“nxtgenphone”.
9999
#
97
APNinfo
#
Pass code
Function code
APN info for network