GENERAL SAFETY OBLIGATIONS
1) ATTENTION! To ensure the safety of people, it is important that you read all the following
instructions. Incorrect installation or incorrect use of the product could cause serious harm to
people.
2) Carefully read the instructions before beginning to install the product.
3) Do not leave packing materials (plastic, polystyrene, etc.) within reach of children as such materials are potential
sources of danger.
4) Store these instructions for future reference.
5) This product was designed and built strictly for the use indicated in this documentation. Any other use, not expressly
indicated here, could compromise the good condition of the product and/or be a source of danger.
6) FAAC declines all liability caused by improper use or use other than that for which the product was intended.
7) Do not install the equipment in an explosive atmosphere: the presence of gas or inflammable fumes is a serious danger
to safety.
8) FAAC is not responsible for failure to observe Good Technique in the installation of the product.
9) Before attempting any job on the system, cut out electrical power.
10) Make sure that a differential switch with threshold of 0.03A is fitted upstream of the system.
11) Make sure that the earthing system is perfectly realised and connect the yellow/green earth terminal of the Token
Acceptor to it.
12) FAAC declines all liability as concerns safety and efficient operation of the Token Acceptor, if system components
not produced by FAAC are used.
13) For maintenance, strictly use original parts by FAAC.
14) Do not in any way modify the components of the Token Acceptor.
15) The installer shall supply all information concerning the system operation and shall hand ove
r to the user the “User’s
Guide” supplied with the product.
16) The user must not attempt any kind of repair or direct action whatever and contact qualified personnel only.
17) Anything not expressly specified in these instructions is not permitted.
2
ENGLISH
ENGLISH
