10
Instruction manual version 1 for software version 4.04
INSTRUCTION MANUAL FOR DAAB EP104 CONTROL BOARD
Technical specification
Dimensions (WxHxD)
190x224x60 mm.
Power supply
3-phase or single-phase.
Power supply
N+PE, PE, N+PE, PE (requires external transformer)
Permitted voltage variation
±10%
Frequency
50 Hz.
Motor in 3-phase operation
3x400 V
3-phase asynchronous motor 0.18-1.5 kW.
Motor in 3-phase operation
3x230 V
3-phase asynchronous motor 0.18-0.75 kW.
Motor in single-phase
operation
Single-phase motor with capacitor 0.18-0.37 kW.
Fuses
External fuse max T10A.
Power consumption
Automatic control unit 22 VA + electric motors.
Operating mode
Intermittent operation 50% / maximum period of use 4 minutes
Temperature range
0 to 45 °C.
Safety edge
2 closing inputs S.E1 and S.E2 for safety edge while closing.
1 opening input S.E3 for safety edge in the opening movement.
Impedance 1.0-8.2 kΩ, power capability at least ½ W.
Safety circuit
Max impedance 3 Ω in stop circuit.
Cable length 0.75mm2 max 60m. Cable length 1.5mm2 max 120m.
One 0-50 V analogue input to measure the voltage after the stop circuit.
Internal motor protection
Setting range 0.5-6 A.
Load guard
Setting range 0.05-1.99 kW.
Digital inputs
9
Logical 0 0-8VDC.
Logical 1 12-30VDC.
Input current 5mA at 24VDC.
Cable length max 200m
Supply voltage for photocell 24VDC max 50mA.
External supply
24VDC max 300mA.
Communication
RS-485 between two EP104 units. Cable length max 1000m.
Protection class
The PCB is designed for an enclosure rating of at least IP54.
Summary of Contents for DAAB EP104
Page 74: ......