B614
1
732998 - Rev.A
Tr
ansla
tion of the orig
inal instruc
tions
ENGLISH
EU DECLARATION OF CONFORMITY
The Manufacturer
Company name:
FAAC S.p.A. Soc. Unipersonale
Address:
Via Calari, 10 - 40069 Zola Predosa BOLOGNA - ITALY
hereby declares under its own exclusive liability that the following product:
Description:
Barrier
Model:
B614
complies with the following applicable EU legislations:
2014/30/EU
2011/65/EU
Furthermore, the following harmonised standards have been applied:
EN 61000-6-2:2005
EN 61000-6-3:2007 + A1:2011
Bologna, Italy, 01-07-2018 CEO
A. Marcellan
DECLARATION OF INCORPORATION FOR PARTLY COMPLETED MACHINERY
(2006/42/EC ANNEX II P.1, B)
Manufacturer and person authorised to prepare the relevant technical documentation
Company name:
FAAC S.p.A. Soc. Unipersonale
Address:
Via Calari, 10 - 40069 Zola Predosa BOLOGNA - ITALY
hereby declares that for the partly completed machinery:
Description:
Barrier
Model:
B614
The essential requirements of the Machinery Directive 2006/42/EC (including all applicable amendments) that have been applied and
fulfilled are as follows:
1.1.2; 1.1.3; 1.1.5; 1.2.1; 1.2.3;1.2.5; 1.2.6; 1.3.1; 1.3.2; 1.3.4; 1.3.6; 1.3.8.1; 1.3.9; 1.4.1; 1.4.2.1; 1.5.1;
1.5.2; 1.5.3 1.5.5; 1.5.6; 1.5.7; 1.5.8; 1.5.10; 1.5.11; 1.5.13; 1.6.1; 1.6.4; 1.7.3; 1.7.4.1; 1.7.4.2; 1.7.4.3
and that the relevant technical documentation has been compiled in compliance with part B of Annex VII.
Furthermore, the following harmonised standards have been applied:
EN60335-2-103-2015
EN12100:2010
EN13849-1:2015 CAT 2 PL “c”
EN13849-2:2012
Other standards applied:
EN 12453:2000
And also undertakes to transmit, in response to a reasoned request by the national authorities, relevant information on the partly
completed machinery by mail or e-mail.
Finally, the manufacturer declares that the above-mentioned partly completed machinery must not be put into service until the final
machine in which it is to be incorporated has been declared compliant with the requirements of the above-mentioned Machinery
Directive 2006/42/EC.
Bologna, Italy, 01-07-2018 CEO
A. Marcellan
