![background image](http://html1.mh-extra.com/html/faac/844-er-3ph/844-er-3ph_translation-of-the-original-instructions_3125424010.webp)
4
5
844 ER 3PH
8
532366 - Rev.A
12
15
17
11
14
16
3
1
7
8
9
10
13
2
(x 2)
6
5
4
Tr
ansla
tion of the orig
inal instruc
tions
ENGLISH
3.7 COMPONENT IDENTIFICATION
COMPONENTS SUPPLIED
Gearmotor
1 Casing
2 Electronic board E844 3PH with protective cover
3 Limit switch sensor
4 Magnet for encoder
5 Anti-crushing clutch adjustment screw
6 Oil filler plug
7 Earth connector
8 Gearmotor body
9 Key release
10 Fastening brackets
Hardware/accessories
11 Gearmotor bracket guards
12 Cable glands to install in the board compartment
13 Dowel pin and washer for securing the Z16 and Z20 pinions, casing fastening
screws with screw caps, clutch adjustment spring (for leaves weighing more
than 1000 kg), adhesive hazard warning sign, release key. DO NOT use terminal
boards, cable lugs for the earth cable, long screw caps.
14 Pair of plates for the inductive opening and closing limit switches
COMPONENTS SUPPLIED SEPARATELY
The installation requires the following FAAC components that are
supplied separately:
15
Steel rack with spacers (to be screwed or welded on)
16
Foundation plate with mounting hardware
17
Module 4 Pinion Z20, or Z16, or Z12
DANGER, AUTOMATIC MOVEMENT warning sign
Summary of Contents for 844 ER 3PH
Page 1: ...844 ER 3PH Translation of the original instructions...
Page 29: ......
Page 30: ......
Page 31: ......