background image

5

9

Read the instructions carefully before using the product, and
keep them for future consultation.

GENERAL SAFETY REGULATIONS

If installed and used correctly, the automation 390 will ensure a
high degree of safety.
Some simple rules regarding behaviour will avoid any accidental
trouble:
- Do not pass through the leaves while they are moving.  Before

passing through the leaves, wait until they are fully open.

- Do not, on any account, stand between the leaves.
- Do not stand near the automation and do not allow children

and other people to stand there, especially while it is operating.

- Keep remote controls or any other pulse generator well away

from children to prevent the automation from being activated
involuntarily.

- Do not allow children to play with the automation.
- Do not willingly obstruct movement of the leaves.
- Do not allow branches or shrubs to interfere with leaf movement.
- Keep illuminated signalling systems efficient and clearly visible.
- Do not attempt to activate the leaves manually unless you

have released them first of all.

- In the event of a malfunction, release the leaves to allow access

and wait for qualified personnel to take appropriate action.

- After enabling manual operating mode, switch off the power

supply to the system before restoring normal operating mode.

- Do  not  make  any  alterations  to  the  components  of  the

automation.

- Do not attempt to repair or adjust the system personally, but

contact qualified personnel only.

- Call in qualified personnel at least every 6 months to check the

efficiency  of  the  automation,  safety  devices  and  earth
connection.

DESCRIPTION

These instructions apply to the following model:

FAAC 390

FAAC 390 automation for residential swing-leaf gates consists of
an irreversible electro-mechanical operator with guard and an
articulated-arm activation system fitted to the gate with the
appropriate accessories.
The irreversible system ensures the gate is mechanically locked
when the motor is not operating. No lock need be installed for
leaves up to 1,8m in length.
A manual release makes it possible to move the gate in the event
of a power-cut or fault.
The  operators  are  supervised  by  an  electronic  control  unit,
housed  in  a  container  adequately  protected  against
atmospheric agents.
The leaves are normally in closed position.
When the electronic control unit receives an opening command
by remote control or by any other pulse generator, it activates the
operator to rotate the leaves until they are sufficiently open to
provide access.
If automatic operating mode was set, the leaves close on their
own after the selected pause time has elapsed.
If semi-automatic operating mode was set, a second pulse must
be sent to allow the leaves to close again.
A stop pulse (if supplied) always stops movement.
For  detail  on  operation  of  the  automation  under  different
operational logics, consult the installation technician.
The automations include safety devices (photocells, sensitive
edges,…) which prevent the leaves from moving when there is an
obstacle in the area they protect.

End-user guide

AUTOMATION FAAC 390

The automation 390 requires use of electronic appliances with an
electronic torque control device.
The light indicates that leaves are moving.

MANUAL OPERATING MODE

If the gate has to be operated manually in the event of a power-
cut or automation fault, use the release device as follows:
•Fit the supplied Allen wrench and turn it by about a half turn until

it stops, in the direction shown in Fig. 1-2,  depending on type
of installation.

RESTORING NORMAL OPERATING MODE

To avoid an involuntary pulse from activating the gate during the
manoeuvre, before re-locking the operator, switch off power to
the system.
•Fit the supplied Allen wrench in the release device and turn it

by about a half turn until it stops, in the direction shown in Fig.
1-2,  depending on type of installation.

•The release device can be activated without removing the

guard.

S X

Fig. 1

BLOCCA  / LOCK

BLOQUE / VERRIEGELT

BLOQUEAR

SBLOCCA  / UNLOCK

DEBLOQUE / ENTRIEGELT

DESBLOQUEAR

DX

Fig. 2

BLOCCA  / LOCK

BLOQUE / VERRIEGELT

BLOQUEAR

SBLOCCA  / UNLOCK

DEBLOQUE / ENTRIEGELT

DESBLOQUEAR

Reviews: