F5 VIPRION 4800 Series, Platform Manual

Page: 25 / 110

tmsh
2.
Change to the network module.
net
The command prompt updates with the module name:
user@bigip01(Active)(/Common)(tmos.net)#
.
3. Display the valid media types for a specific interface:
show running-config interface <interface_key> media-capabilities
Important: In all Gigabit Ethernet modes, the only valid duplex mode is full duplex.
This is an example of the output that you might see when you run this command on interface 1.3:
net interface 1.3 {
media-capabilities-sfp {
none
auto
1000T-FD
1000LX-FD
1000SX-FD
1000CX-FD
10000SR-FD
10000LR-FD
10000SFPCU-FD
}
}
Network interface LED behavior
The appearance and behavior of the network interface LEDs on the blades indicate network traffic activity,
interface speed, and interface duplexity.
SFP+ port LED behavior
The appearance and behavior of the SFP+ interface LEDs indicate network traffic activity, interface speed,
and interface duplexity, if supported.
Note: On the B4300 Series blade, the 40GbE interfaces are lit only when all four 10GbE interfaces contain
transceiver modules and have a link.
Activity LED Speed LED Link Blade type
Not lit Not lit No link B4200
Not supported Not supported 10 Mbit/s, half duplex B4200
Not supported Not supported 10 Mbit/s, full duplex B4200
Not supported Not supported 100 Mbit/s, half duplex B4200
Not supported Not supported 100 Mbit/s, full duplex B4200
Not supported Not supported 1 Gbit/s, half duplex B4200
Green (with traffic) Amber solid 1 Gbit/s, full duplex B4200
Not supported Not supported 10 Gbit/s, half duplex B4200
25
Platform Guide: VIPRION
®
4800 Series