F5 VIPRION 4800 Series, Platform Manual

Page: 22 / 110

This is an example of the output that you might see when you run this command on interface 1/1.2 (slot
1, interface 1.2):
----------------------------------------------------------------
Net::Interface
Name
Status Bits Bits Pkts Pkts Drops Errs Media
In Out In Out
----------------------------------------------------------------
1/1.2
up 637.8G 5.8M 1.1G 5.7K 1.1G 0 10000SR-FD
Viewing the status of all interfaces using tmsh
You can use
tmsh
to view the status of all interfaces on the platform.
1. Open the Traffic Management Shell (tmsh).
tmsh
2. Change to the network module.
net
The command prompt updates with the module name:
user@bigip01(Active)(/Common)(tmos.net)#
.
3. Display the current status of all interfaces.
show interface
This is an example excerpt of the output that you might see when you run this command on
B4100/B4200/B4300 Series blades:
---------------------------------------------------------------------
Net::Interface
Name
Status Bits Bits Pkts Pkts Drops Errs Media
In Out In Out
---------------------------------------------------------------------
1/1.1
miss 0 0 0 0 0 0 none
1/1.2 up 636.5G 5.5M 1.1G 5.4K 1.1G 0 10000SR-FD
1/1.3 miss 0 0 0 0 0 0 none
1/1.4 miss 0 0 0 0 0 0 none
1/1.5 miss 0 0 0 0 0 0 none
1/1.6 miss 0 0 0 0 0 0 none
1/1.7 miss 0 0 0 0 0 0 none
1/1.8 miss 0 0 0 0 0 0 none
1/1.9 uninit 0 0 0 0 0 0 none
1/1.10 uninit 0 0 0 0 0 0 none
1/1.11 uninit 0 0 0 0 0 0 none
1/1.12 uninit 0 0 0 0 0 0 none
1/1.13 uninit 0 0 0 0 0 0 none
1/1.14 uninit 0 0 0 0 0 0 none
1/1.15 uninit 0 0 0 0 0 0 none
1/1.16 uninit 0 0 0 0 0 0 none
1/2.1 uninit 0 0 0 0 0 0 none
1/2.2 uninit 0 0 0 0 0 0 none
1/2.3 miss 0 0 0 0 0 0 none
1/2.4 miss 0 0 0 0 0 0 none
1/mgmt up 248.3M 42.8M 392.2K 16.1K 0 0 1000T-FD
22
The VIPRION
®
4800 Series Platform