F5 BIG-IP 8950, Platform Manual

Page: 15 / 56

When using the tmsh interface command, you can either apply the command to all interfaces or to a
specific interface key.
Viewing the status of a specific interface
You can use
tmsh
to view the status of a specific interface on a platform.
1. From the system prompt, type the following to open
tmsh
:
tmsh
The following prompt displays:
(tmos)#
.
2. Type the following to navigate to the network module:
net
The following prompt displays:
(tmos.net)#
.
3. Use the following syntax to display the current status of a specific interface:
show interface <interface_key>
The following is an example of the output you may see when you issue this command on interface 1.2:
---------------------------------------------------------
Net::Interface
Name Status Bits Bits Errs Errs Drops Drops Colli
In Out In Out In Out sions
---------------------------------------------------------
1.2 up 191.4K 0 0 0 374 0 0
Viewing the status of all interfaces
You can use
tmsh
to view the status of all interfaces on the platform.
1. From the system prompt, type the following to open tmsh :
tmsh
The following prompt displays: (tmos)# .
2. Type the following to navigate to the network module:
net
The following prompt displays:
(tmos.net)#
.
3. Use the following syntax to display the current status of all interfaces:
show interface
The following is an example of the output you may see when you issue this command:
------------------------------------------------------------
Net::Interface
Name Status Bits Bits Errs Errs Drops Drops Colli
In Out In Out In Out sions
------------------------------------------------------------
1.1 down 0 0 0 0 0 0 0
1.2 up 191.4K 0 0 0 374 0 0
1.3 down 0 0 0 0 0 0 0
1.4 up 22.5K 0 0 0 44 0 0
2.1 miss 0 0 0 0 0 0 0
2.2 miss 0 0 0 0 0 0 0
mgmt up 43.2G 160.0G 0 0 0 0 0
15
Platform Guide: 8950