F5 ARX-VE, Planning Manual

Page: 58 / 64

Chapter 1
Site Planning
1 - 52
ARX-1500 Connectors
The ARX-1500 is powered by two power supplies (1+1 redundancy)
system) consisting of two power modules and one power system frame. Two
power modules are recommended for full redundancy and load-sharing. The
power supplies require a 10A / 220VAC input cord, which is provided with
the chassis. The AC outlet to the switch must be properly grounded.
ARX-2000 Connectors
The following table describes the cable connectors used on the ARX-2000.
Table 1.18 ARX-1500 Cable Connectors
Interface Connector Purpose
Console (labeled
CONSOLE on back of
switch) RJ-45 Serial port for CLI access
Management (labeled
MGMT on back of
switch) RJ-45 Ethernet port for CLI or GUI access
Gigabit Ethernet (on
front of switch) RJ-45 100/1000BASE-T Ethernet ports for access to client/server
networks
Table 1.19 ARX-2000 Cable Connectors
Interface Connector Purpose
Console (labeled
CONSOLE on back of
switch) RJ-45 Serial port for CLI access
Management (labeled
MGMT on back of
switch) RJ-45 Ethernet port for CLI or GUI access
Gigabit Ethernet (on
front of switch) RJ-45 100/1000BASE-T Ethernet ports for access to client/server
networks