F5 ARX-VE, Planning Manual

Page: 56 / 64

Chapter 1
Site Planning
1 - 50
Pinout Assignments for ARX-500, ARX-2000, and ARX-4000
The following table lists the RJ-45 pinout assignments for the rollover cable
and the adapter. The left column shows the transmit (TxD), ground (GND),
and receive (RxD) signals. and the right column shows the signals reversed
at the console device. The intervening columns show the pins that carry each
of those signals.
Pinout Assignments for the ARX-1500 and the ARX-2500
The console port uses a RJ45 connector on the system. Here is the table that
describes the console port pinout.
The following table shows the pinout assignments for the ARX-1500 and
the ARX-2500.
Table 1.15 SCM/ACM console port signaling/cabling using a rollover cable for ARX-500, ARX-2000, and
ARX-4000.
SCM/ACM
Console Port RJ-45 Rollover Cable RJ-45 to DB9 Adapter
Console
Device
DTE Signal
RJ-45
Pinout USOC
Color RJ-45
Pinout RJ-45
Pinout
T568 Color
DB9F
Pinout
DTE Signal
TxD 3 yellow 6 6 yellow 2 RxD
GND 4 green 5 5 green 5 Signal
Ground
GND 5 red 4 4 red
RxD 6 black 3 3 black 3 TxD
Table 1.16 Pinout assignments for theARX-1500 and the ARX-2500
Signal Type RJ45 Pin Numbers
RTS 1
DTR 2
TD 3
SGND 4
RI 5
RD 6
DSR 7
CTS 8