F3A EUROPA PRO Mini, Assembly Manual

Page: 4 / 71

4
Model Assembly Process
! Warning !
An RC aircraft is not a toy! If misused, it can cause serious bodily harm and
damage to property. Fly only in open areas and AMA (Academy of Model
Aeronautics) approved flying sites, following all instructions included with your
plane, radio and engine, avoid flying near full-scale aircraft and avoid flying near
or over groups of people.
The fuselage, wings, stabs, rudder, landing gears and other parts included in this
kit are made of fiberglass, carbon
Fišer and balsa - plywood, the fibers of whose
may cause eye, skin and respiratory tract irritation. Never blow into a part to
remove fiberglass and carbon fiber dust, as the dust will blow back into your eyes.
Always wear safety goggles, a particle mask and rubber gloves when grinding,
drilling and sanding this parts. Vacuum the parts and the work area thoroughly
after working with fiberglass and carbon fiber parts.
It is important to understand that RC Composit Company is unable to monitor
whether you follow the instructions contained in this instruction manual regarding
the construction, operation and maintenance of the aircraft, or whether you install
and use the radio control system correctly. For this reason we at RC Composit
are unable to guarantee or provide a contractual agreement with any individual or
company that the model you have made will function correctly and safely. You, as
operator of the model, must rely upon your own expertise and judgment in
acquiring and operating this model.
By operating this model RC plane you, as operator, assume full
responsibility for your actions.