2
ENGLISH
11
ENGLISH
Make sure the electrical installation is far
from high voltage cables. SPARK
CABLES MUST BE FACTORY
ORIGINALS OR OF SIMILAR QUALITY.
Make sure electrical installations are
welded and properly isolated.
!
THE PROPER OPERATION OF THE
CHANGE-OVER SWITCH DEPENDS ON
FOLLOWING THE ABOVE-MENTIONED
INSTRUCTIONS.
!
NEVER thread the pressure gauge using
your hand. Use a 14mm-fix wrench.
Direct sunlight on the pressure gauge
affects its operation. For example, if the
hood is open, the indicator lights might not
turn on.
NOTES