Error Buffer
In settings page 4, view the error buffer by pressing
——————————————————————————————
The Error Buffer will display error codes if an error does occur. The meter will list the 12 most recent errors since powering on. The error codes
will not automatically be erased if the error is no longer present. The meter has to be power cycled to check if the error still applies. The error
codes and meanings are listed in a table in section 4, below.
The calibration button will lead to a password protected calibration page. This is for internal FW Bell use only.
Device Info
In settings page 4, view the device info by pressing
——————————————————————————————————
The model number, current SW version, current DSP version, and the calibration due date are all listed on the about page.
Figure 3-14
Example About
Page
3-12
